Sikaplan® WP Tape-200
Sikaplan® WP Tape-200 is a PVC based waterproof sealing tape with modified properties for terminations and fixings of Sikaplan® WP membranes.
- Very good bonding attributes
- Long-term water resistance
- Optimized workability, thermally weldable
- Optimized flexibility, plus tensile strength and multi-axial-elongation
- Flexible even in cold temperatures
- Prevents lateral water underflow
Usage
As a waterproofing sealing tape that is heat weldable to Sikaplan® WP waterproofing membranes - Series 1100, 2101 and 2110, based on PVC. The Sikaplan® WP Tape-200 is used to connect the Sikaplan® WP membranes to the substrate and itself at edges and terminations, thereby maintaining a high quality watertight seal. It is specialy designed for waterproofing in cross-sections of tunnels with special high performance, secure terminations of the Sikplan® WP Membrane System.Advantages
- Very good bonding attributes
- Long-term water resistance
- Optimized workability, thermally weldable
- Optimized flexibility, plus tensile strength and multi-axial-elongation
- Flexible even in cold temperatures
- Prevents lateral water underflow
Packaging
Roll size | 200mm (width) × 20m (length) |
Colour
Sikaplan® WP Tape-200, homogenous, supplied in rolls
Thickness | 2 mm including 0.6mm signal layer |
| Colour | signal layer - white |
| bottom base layer - black |
Product Details
APPROVALS / STANDARDS
- Hydrostatic Pressure Resistance Test over 245 Days Sikaplan® WP Tape-200, MFPA, Test report No. B 16.14.047.06
- Hydrostatic Pressure Resistance Test over 55 Days Sikaplan® WP Tape-200, MFPA, Test report No. B 16.14.047.05
Chemical base
Polyvinylchloride (PVC-P)
Thickness
2.00 mm (-5%/+10%) | (EN 1849-2) |
Shelf life
18 months from date of production
Storage conditions
Rolls must be stored in their original packaging and in cool and dry conditions at temperatures between +5°C and 35°C. They must be protected from direct sunlight, rain, snow and ice, etc.Do not stack pallets of rolls during transport or storage.
System Structure
The Sikaplan® WP Tape-200 system consists of a modified PVC tape and Sikadur®-731 or Sikadur®-31 CF or Sikadur-Combiflex® epoxy adhesives.
One grade of the tape is available:
- Sikaplan® WP Tape-200 (width: 200mm)
Suitable adhesives are: Sikadur®-731 or Sikadur®-31 CF including types:
- Sikadur®-731
- Sikadur®-31 CF (LP)
- Sikadur®-31 CF (N)
- Sikadur®-31 CF (R)
or the suitable Sikadur-Combiflex® adhesives types:
- Sikadur-Combiflex® adhesive (N)
- Sikadur-Combiflex® adhesive (R)
Note: This system configuration as described must always be fully complied with and must not be changed.
Ancillary Products:
- Sikaplan® WP Membrane Systems
- Sarna Seam Cleaner
Compatibility
Sikaplan® WP Tape-200 is compatible with Sikaplan® WP 1100 Series, Sikaplan® WP 2101 Series and Sikaplan® WP 2110 Series
Tensile Strength
> 14 N/mm2 | (EN ISO 527) |
Elongation
≥ 300% (machine / cross direction) | (EN ISO 527) |
Tear Strength
≥ 42 kN/m (V = 50mm/min) | (ISO 34 Method B) |
Reaction to Fire
Class E | (EN ISO 11925-2 / EN 13501-1) |
Service temperature
-10°C min. / +35°C max.
Application
Ambient Air Temperature
+5°C min. / +55°C max.
For installation below +5° ambient temperature, special measures are required in accordance with relevant national regulations and Sika guidelines.
Consumption
~1.0 kg/m of Sikadur®-731
Note: The consumption is dependent on substrate surface roughness, size of exposed aggregate, thickness required etc.
SUBSTRATE QUALITY
The substrate must be mechanically prepared e.g. by blast-cleaning, to be free from any cement laitance, damaged concrete, old surface treatments or coatings, then all loose or friable particles must be removed to achieve a contaminant free, open textured surface.The substrate must be dry or maximum mat damp. The substrate temperature must be min 3 Kelvin above dew point conditions and condensation on the freshly applied material must be avoided.Application of adhesivePlease refer to the relevant Product Data Sheet for the specific adhesive that is to be used.