Product Data Sheet Show all documents

SikaProof® Tape-120

Self-adhesive tape for internal jointing / detailing of SikaProof®-808 / -810

SikaProof® Tape-120 is a self-adhesive tape based on a hotmelt adhesive with a carrier film and a release liner.

  • Fully bonded to the concrete structure (same as SikaProof®-808)
  • No lateral water underflow between the concrete structure and the membrane system
  • High adhesion and sealing capability in cold and damp conditions
  • Simple and fast to install
Product Data Sheet Show all documents

Usage

  • Sealing and bonding overlap joints, connections and details within the SikaProof®-808 / -810 membrane system
 

Advantages

  • Fully bonded to the concrete structure (same as SikaProof®-808)
  • No lateral water underflow between the concrete structure and the membrane system
  • High adhesion and sealing capability in cold and damp conditions
  • Simple and fast to install

Packaging

4 rolls packed in one cardboard box  

Individual roll size         

Length: 20 m

Width: 120 (± 5) mm

Colour

Top layer    

Light grey A+ bonding layer with a grey waterproofing layer

Bottom layer  

Transparent/yellowish hotmelt adhesive covered with a release liner

Product Details

Product Information

Shelf life

18 months from date of production

Storage conditions

The Product must be stored in original unopened and undamaged packaging in dry conditions and temperatures between +5 °C and +30 °C. Store in a horizontal position. Do not stack pallets of the rolls on top of each  other, or under pallets of any other materials during transport or storage.
Always refer to packaging.

Thickness

0,60 mm
System information

System Structure

  • SikaProof® -808/-810 sheet membrane system
  • SikaProof® Tape-120 self-adhesive tape for internal jointing
 

Application

Application Information

Ambient Air Temperature

+5 °C min. / +45 °C max.

Substrate Temperature

+5 °C min. / +60 °C max.
Application steps

SUBSTRATE QUALITY

The contact surface is the grey SikaProof®-808/-810 A+ bonding layer. It must be dry or slightly damp, clean and free of any materials that could impair adhesion. If the substrate requirements are not achieved, suitable measures must be taken. Contact Sika® Technical Services for more information.

Documents