Product Data Sheet Show all documents
Sikadur®-732

Sikadur®-732

2-component epoxy resin bonding agent

Sikadur®-732 is a solvent-free, 2-component bonding agent, based on selected epoxy resins. After application to old concrete surface, it provides a perfect bond for new concrete.
Sikadur®-732 complies with ASTM C 881-02, Type II, Grade 2, Class B+C.

Sikadur®-732 provides a bond of far greater strength than the tensile strength of the concrete itself. Therefore, it is suitable for use wherever structural bonding of new concrete to existing one is carried out.
Other benefits are:
  • Easy to apply
  • Solvent-free
  • Unaffected by moisture
  • Highly effective even on damp surfaces
  • Workable at low temperature
  • High tensile strength
Product Data Sheet Show all documents

Usage

  • To permanently bond freshly mixed mortar or concrete to hardened concrete, glazed bricks, tiles, steel or other structural materials.
  • Sikadur®-732 is also used to seal hair lines cracks and as a protective coating to steel parts i.e. anchor plates.
 

Advantages

Sikadur®-732 provides a bond of far greater strength than the tensile strength of the concrete itself. Therefore, it is suitable for use wherever structural bonding of new concrete to existing one is carried out.
Other benefits are:
  • Easy to apply
  • Solvent-free
  • Unaffected by moisture
  • Highly effective even on damp surfaces
  • Workable at low temperature
  • High tensile strength

Packaging

1 & 2 kg set

Colour

Light grey

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

International test report are available
Product Information

Shelf life

12 months when unopened

Storage conditions

Stored in dry place above 0 °C and max. +25 °C.

Density

~ 1.4 kg/l (mixed)
Technical Information

Compressive Strength

> 35 N/mm2

(meets ASTM C881-02 requirements)

At 7 days

Modulus of Elasticity in Compression

> 600 MPa

(meets ASTM C881-02 requirements)

At 7 days

Tensile Strength

>14 N/mm2

(meets ASTM C881-02 requirements)

At 7 days

Tensile Adhesion Strength

2 days

> 7 N/mm²

14 days

> 10 N/mm²

Application

Application Information

Mixing ratio

Comp. A : B = 2 : 1 parts by weight

Pot Life

Temperature (°C)

Time

40

20 min.

30

40 min.

2090 min.

Note: For extending the pot life, component A & B can be stored in cool room prior mixing.
Consumption

Consumption

0.3–0.8 kg/m2 depending upon surface porosity, texture etc.
Application steps

SUBSTRATE PREPARATION

All surfaces must be clean, free from standing water and all loosely adhering particles. Cement laitance should be removed, by mechanical means (i.e. sand blasting).

MIXING

Mix both components together with a slow speed electric drill (max. 600 r.p.m.) until a smooth consistency is achieved.

CLEANING OF TOOLS

Clean all tools and equipment immediately after use with Thinner C.

Documents