Product Data Sheet Show all documents

Sika® Geotextile-500

Sika® Geotextile-500 is a 500 g/m2 levelling and protective geo-textile layer based on Polyethylene terephthalate (PET).

  • Highly resistant to ageing
  • High tensile strength and elongation
  • Resistant to all natural aggressive mediums in ground water and soil
  • Suitable for contact with soft water(aggressive to concrete)
  • High flexibility in cold temperatures
  • Can be installed on damp and wet substrates
Product Data Sheet Show all documents

Usage

As a surface levelling and protective geo-textile layer under sheet waterproofing membranes, for use in tunnels, basement and other underground structures.  

Advantages

  • Highly resistant to ageing
  • High tensile strength and elongation
  • Resistant to all natural aggressive mediums in ground water and soil
  • Suitable for contact with soft water(aggressive to concrete)
  • High flexibility in cold temperatures
  • Can be installed on damp and wet substrates

Packaging

Roll size : 3.00 m (roll width) x 50.00 m (roll length)
Roll weight: 77.00 kg

Colour

Surface: structured

White

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Product Declaration GB/T17638-1998- Geo-textiles.
Geo-textile-related products – Required characteristics for use in the construction of tunnels and underground structures.
Product Information

Shelf life

The product does not expire if correctly stored

Storage conditions

Rolls must be stored in original package, in horizontal position and in cool and dry conditions. Protected from direct sunlight, rain, snow and ice, etc.

Product Declaration

GB / T 17638–1998 Mandatory for Chinese standard

Thickness

~3.6 mm

Mass per unit area

~500 g/m2
System information

System Structure

Ancillary products:

  • Sikaplan® WP Disk, Sikaplan® WT Disk and Sika Disk
  • All Sikaplan® WP and Sikaplan® WT membranes and prefabricated parts
  • Sikaplan® WP Protection sheet
  • Sika® Waterbars WP, Types AR and DR for fixing pieces and Waterproofing concrete joints
Technical Information

Resistance to Dynamic Perforation

2.7 KN

GB/T17638-1998

Tensile Strength

Tensile strength

16.0 KN/m

GB/T17638-1998

Tear strength

0.42 KN

GB/T17638-1998

Elongation

25–100 %

GB/T17638-1998

Water Permeability

Permeability coefficien

K*10-1-10-3(cm/s), k=1.0-9.9

GB/T17638-1998

Opening Size

0.07–0.2 mm

GB/T17638-1998

Application

Application Information

Substrate Temperature

+5 °C min./ +35 °C max.

Application limits: Do not use for permanent exposure to UV light and weathering.
To be covered within 1 month of installation.
Application steps

SUBSTRATE QUALITY

Substrate quality: Substrate should be smooth and solid.

Substrate preparartion: If the substrate is rough, a fine gunite layer on the substrate with a min. thickness of 50 mm is required and cleaned without loosen aggregates, stones, nails wires, etc.
If steel existed, such as girders, reinforcement mesh, anchor, etc., a min. 50 mm gunite layer is a must as a cover.

Documents