Sikalastic®-110
Sikalastic®-110 is a water based one part modified polyurethane/bituminous coating, formulated to form a highly elastic, seamless and crack bridging membrane.
- Easy application by roller, brush or aireless spraying
- High elasticity
- High crack bridging capability
- Optimum adhesion onto concrete
- Can be applied directly on damp surface
- Non-toxic
- Low VOC and Eco-friendly
Usage
Due to its high elasticity, Sikalastic®-110 can be applied on different structures including those subject to thermal movement and vibration such as:- Concealed RC flat roof
- External walls to be buried below ground like retaining walls, basements, foundations, etc.
- Waterproofing coating under tiles, plaster or screeds areas such as podium, balconies, planter box, etc.
Advantages
- Easy application by roller, brush or aireless spraying
- High elasticity
- High crack bridging capability
- Optimum adhesion onto concrete
- Can be applied directly on damp surface
- Non-toxic
- Low VOC and Eco-friendly
Packaging
20 kg pail
Colour
Black
Product Details
SUSTAINABILITY
Singapore Green Label "Environmentally Preferred Coating"
Chemical base
Polyurethane bituminous hybrid
Shelf life
12 months from date of production if stored properly in undamaged and unopened original sealed packaging.
Storage conditions
Store in undamaged original sealed containers, in dry conditions and protected from direct sunlight at temperatures between +5 °C and +30 °C
Density
1.08 kg/l
System Structure
Standard Coating System
Primer | 1 x dilute 1 part Sikalastic®-110 at 0.2kg/m² with 1 part of clean water |
Coating | Min. 2 x Sikalastic®-110 at ~0.65 kg/m²/coat |
Total Consumption | ~1.5 kg/m² |
Reinforced Coating System
Primer | 1 x dilute 1 part Sikalastic®-110 at 0.2kg/m² with 1 part of clean water |
Coating | 1 x Sikalastic®-110 at 0.65kg/m² + Sika Reemat Premium reinforcement + 2 x Sikalastic®-110 at 0.65kg/m² |
Total consumption | ~2.0 kg/m² |
Special note: If the climatic conditions are very hot and dry (approx. 40 °C and relative humidity approx. 50%), reduce the consumption to a maximum of 0.5 kg/m2/coat to avoid premature skin curing, or apply when the temperature is below 35°C
Tensile Strength
≥ 0.8 N/mm² (Without reinforcement, at 14 days, +25 °C) | (ASTM D412) |
Application
Ambient Air Temperature
+5 °C min. / +40 °C max.
Relative Air Humidity
Max. 80 % r.h.
Substrate Temperature
+5 °C min. / +40 °C max.
Waiting Time / Overcoating
First coat can be applied immediately after the primer become tacky free. Allow minimum 4 - 5 hours (at +25 °C) between the first coat and second coats.
Applied Product Ready for Use
Sikalastic®-110 should be allowed to cure for min. 48 - 72 hours (at +25 °C) prior to overlaying with screed.
Before ponding test (if required), allow Sikalastic®-110 to cure at least 5 - 7 days (at +25 °C).
SUBSTRATE PREPARATION
The concrete must be dry, structurally sound, laitance free, clean and free from dirt, oil, grease or other contaminants and loose or friable particles. The substrate must be sound and of sufficient strength. If in doubt, apply a test area first.
Weak concrete must be removed and surface defects such as blowholes and voids must be fully exposed. All dust, loose and friable material must be completely removed from all surface before application of the product, preferably by brush and/or vacuum.
The substrate should be without rising moisture and free of surface water and leaks.
MIXING
Prior to application stir Sikalastic®-110 thoroughly in order to achieve a homogeneous mix
APPLICATION
Sikalastic®-110 is applied using brush, roller or by spray.
CLEANING OF TOOLS
Clean all tools and application equipment with water immediately after use. Hardened and/or cured material can only be mechanically removed.