Product Data Sheet Show all documents
SikaBond®-124 Instant Nails

SikaBond®-124 Instant Nails

HIGH STRENGTH MULTIPURPOSE ADHESIVE

SikaBond®-124 Instant Nails is a 1-part, rigid, construction adhesive with high final strength that bonds most common construction material substrate. Internal and covered external use.

  • Easy to apply
  • Rapid initial grab after flash off
  • Rapid strength gain
  • Wide adhesion range
Product Data Sheet Show all documents

Usage

An adhesive to bond most construction components, such as:
  • Skirting boards
  • Wooden frames
  • Ceramics, bricks
  • Flooring panels
  • Can be used on polystyrene and mirror
  • Fibre-reinforced cement board
  • Metal protection angles
 

Advantages

  • Easy to apply
  • Rapid initial grab after flash off
  • Rapid strength gain
  • Wide adhesion range

Packaging

333 g cartridge, 12 cartridges per box

Colour

Wood Brown

Product Details

Product Information

Chemical base

Synthetic rubber

Shelf life

18 months from the date of production

Storage conditions

The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C. Always refer to packaging.

Density

~1,20 kg/l(ASTM D1002)
Technical Information

Shore A Hardness

~80 (after 28 d)(ISO 868)

Shear Strength

~3.2 N/mm2 (ASTM D1002 Wood to Wood)

Service temperature

−30 °C min. / +60 °C max.(maximum 5 freeze / thaw cycles)

Application

Application Information

Ambient Air Temperature

+5 °C min. / +40 °C max.

Substrate Temperature

+5 °C min. / +40 °C max., min. 3 °C above dew point temperature

Open time

~1-5 min (23 °C / 50 % r.h.)
Consumption

Yield

1 Cartridge (333 g)

Dimension
~10 m beadNozzle diameter = 6 mm
~30 g per linear meter
~100 spotsDiameter = 30 mm
Thickness = 4 mm
Application steps

SUBSTRATE PREPARATION

All surfaces must be clean, sound, dry and free of oil, grease and surface contamination. Thoroughly remove all loose flaking particles and dust. Light abrasion is recommended for improved adhesion.

CLEANING OF TOOLS

Clean all tools and application equipment immediately after use with Sika® Remover-208. Once cured, hardened material can only be removed mechanically. For cleaning skin use Sika® Cleaning Wipes-100.

Documents