Product Data Sheet Show all documents
SikaWall®-340 Smooth VN

SikaWall®-340 Smooth VN

A ready-to-mix interior & exterior wall and ceiling skimcoat

SikaWall®-340 Smooth VN is a skim smoothing rendering paste to be mixed with cement or gypsum for levelling uneven surfaces and filling small bubbles in concrete surfaces. A smooth surface is obtained by eliminating blemishes such as grooves, seams and rock pockets.

▪ Perfectly smooth finish ▪ Can be exposed or covered ▪ Final aspect can be same color of substrate ▪ Excellent trowel ability on application ▪ Money and time saving (less paint may be required)
Product Data Sheet Show all documents

Usage

SikaWall®-340 Smooth VN is suitable for wall and ceiling, interior and exterior application. Permissible Substrates Interior and Exterior ▪ Traditional rendering ▪ Shuttered concrete ▪ Reinforced concrete shell work ▪ Concrete soffits ▪ Precast concrete panels Interior only ▪ Gypsum and gypsum tiles (in gypsum mix)   Suitable Covering Materials ▪ Thick synthetic finish coats ▪ Mineral paint ▪ Wallpaper ▪ Fabric ▪ Bonded plastic coverings ▪ Painter’s coatings

Advantages

▪ Perfectly smooth finish ▪ Can be exposed or covered ▪ Final aspect can be same color of substrate ▪ Excellent trowel ability on application ▪ Money and time saving (less paint may be required)

Packaging

5 kg/pail, 20 kg/pail.

Colour

White paste

Product Details

Product Information

Shelf life

12 months from date of production if stored in undamaged and unopened, original sealed packaging.

Storage conditions

Store in dry condition and protected from direct sunshine.

Density

1.3 - 1.4 kg/L
Technical Information

Tensile Adhesion Strength

≥ 0.5 MPa at 28 days at 1 mm thickness (on concrete)

Application

Application Information

Mixing ratio

SikaWall®-340 Smooth VN : Cement (1 : 0.7-1)

Layer Thickness

0.3 - 2.0 mm

Ambient Air Temperature

+10°C to +35°C

Initial Set Time

3 hours 30 minutes at 25°C

Waiting Time / Overcoating

~3 - 7 days
Application steps

MIXING

  1. Mix SikaWall®-340 Smooth VN 1 kg with cement 0.7 kg to 1 kg (white or grey) or gypsum until the product is evenly distributed. Do not add any water.
  2. The substrate cement or gypsum must not be dry to prevent the slump and mixing problem for the best product quality.
  3. Mixing should be carried out as follows: In case of small quantity, use small paddle to mix at least 3 minutes. For big quantity, the machine is recommended with a speed at 500 rpm. Mixing time: at least 3 minutes or required consistency is obtained.  

  4. Leave the mixture to stand for 1 - 3 minutes.
  5. Different cement brands may have the different color result. Test before actual application. Final color result depend on selected cement and quantity of mixing cement.

APPLICATION

  1. Apply a first coat of mixed product with a trowel.
  2. Apply a minimum of 2 coats : the first coat is used for level the substrate and the second to finish. More coats can be applied to meet the required thickness or texture.
  3. If there are too many porous on the substrate, apply first coat to fill those areas first. Then the other layers will be easier and quicker.
  4. Allow a sufficient drying time between the coats for 10 - 45 minutes.
  5. Can use sand paper no.380 to polish the surface.
  6. Allow 3 - 7 days before applying covering material.

CLEANING OF TOOLS

Remove non-hardened SikaWall®-340 Smooth VN products from tools and equipment with water. Hardened material can only be removed mechanically.

Documents