Product Data Sheet Show all documents
SikaMur®-75 Ready Mix VN

SikaMur®-75 Ready Mix VN

Multifunctional dry mixed mortar - grade 75#

SikaMur®-75 Ready Mix VN is a ready-mixed, high quality dry mortar with grade 75#, mixed and packaged at the factory. Ingredients of SikaMur®-75 Ready Mix VN are Polymer cement-based mortar, selected sand (removed from toxic impurities such as mud, organic and inorganic impurities) and multi-functional additives.

  1. Quality of SikaMur®-75 Ready Mix VN is assured at the factory and meets national standards: Clean mortar – its durability is 2-3 times higher than traditional mortar.
  2. Easy to use, shortened 1/4 execution time, put to use early: by reducing waiting time between stages, no need to sand screening and decrease 90 % of cleaning time and the process for transporting waste out.
  3. Usage range: indoor and outdoor.
  4. Save 15% of materials as compared to traditional mortar: SikaMur®-75 Ready Mix VN is light, only equal to two third of density of traditional mortar. Plastering thickness of SikaMur®-75 Ready Mix VN is, only equal to two third of traditional mortar and specially Loss rate is insignificant. Reduce over 97% of rate of loss in the use of materials in accordance with allowable loss rate speculated by the State.
  5. Environmentally friendly.
Product Data Sheet Show all documents

Usage

SikaMur®-75 Ready Mix VN is a multifunctional dry mixed mortar with grade 75#, used as floor screening, building and plastering on indoor and outdoor walls.  

Advantages

  1. Quality of SikaMur®-75 Ready Mix VN is assured at the factory and meets national standards: Clean mortar – its durability is 2-3 times higher than traditional mortar.
  2. Easy to use, shortened 1/4 execution time, put to use early: by reducing waiting time between stages, no need to sand screening and decrease 90 % of cleaning time and the process for transporting waste out.
  3. Usage range: indoor and outdoor.
  4. Save 15% of materials as compared to traditional mortar: SikaMur®-75 Ready Mix VN is light, only equal to two third of density of traditional mortar. Plastering thickness of SikaMur®-75 Ready Mix VN is, only equal to two third of traditional mortar and specially Loss rate is insignificant. Reduce over 97% of rate of loss in the use of materials in accordance with allowable loss rate speculated by the State.
  5. Environmentally friendly.

Packaging

25 kg per bag.

Colour

Powder / Grey

Product Details

Product Information

Shelf life

Min 9 months if stored properly in unopended, original packaging.

Storage conditions

Dry, cool and shaded place.

Density

1,650 kg/m3 dry.
Technical Information

Compressive Strength

At least 75 kg/cm2 after 28 days.

TCVN 4314:2003

 

Application

Application Information

Mixing ratio

Approx 3.5 - 4.5 L of clean water per 25 kg bag.

Substrate Temperature

Minimum 8°C

Maximum 40°C
Consumption

Consumption

Consumption is always dependent on the substrate surface profile and roughness.

Coverage: ~20,5 kg/1m2/cm thickness.
Application steps

MIXING

Add approximately SikaMur®-75 Ready Mix VN powder to approx 3.5 - 4.5 L of clean water and mix thoroughly using a mechanical mixer for 3-5 minutes until a homogeneous lump-free paste is achieved. Allow the mix to stand 1-2 minute and thoroughly re-mix for another 1 minute before using.

 

APPLICATION

The layer mortar of SikaMur®-75 Ready Mix VN is completed and smoothed by the Styrofoam float.

In cases where multiple layers of mortar are required, the first layer must be leveled, then properly roughened and allowed to dry for 7 days before applying the second layer. To increase the adhesion between the mortar layers, it is recommended to use a Sika Latex bonding coat with a ratio of: 1 liter Sika Latex + 1 liter water + 4 kg cement.

CLEANING OF TOOLS

Remove non-hardened SikaMur®-75 Ready Mix VN products from tools and equipment with water. Hardened material can only be removed mechanically.

Documents