Products for Superplasticizers

  • Sikament®-R4 (ER)

    High range water-reducing  and set retarding concrete admixture

     

    Use

    Superplasticizer is used for flowable and site batch concrete

    Characteristics and Advantages

    Sikament® R4 provides the following properties:
    As a superplasticizer:

    •     Highly effective without increased w/c ratio or the risk of segregation
    •     Lasting control of slump loss
    •     No adverse effect on ultimate strength

    As a water reducer:

    •     Early and ultimate strength significantly increased
    •     Allow substantial cement reduction compared to plain concrete
    •     Especially suitable for hot climate
    •     No excessive air entrainment
    •     No adverse shrinkage effect
    •     Improved surface finish
    •     Increased watertightness

    Packaging

    1000 ltr
    200 ltr
    25 ltr
    5 ltr

    Product Data Sheet

    Sikament® R4 (ER)

    General Information

    Sikament®-R4 (ER)
  • Sikament®-2000 AT

    High range water-reducing and set retarding concrete admixture

     

    Use

    Used especially for high strength concrete that needs long lasting slump retention under hot climate condition

    Characteristics and Advantages

    • Substantial improvement in workability without increased water
    • Allow substantial cement reduction compared to plain concrete
    • Significant increase of early and ultimate strength
    • Especially suitable for concreting at elevated temperatures
    • Long lasting slump retention
    • Improved surface finish
    • Reduced shrinkage and creep
    • Chloride free

    Color

    Dark BrownPackaging

    1000 ltr

    200 ltr

    25 ltr

    5 ltr

    Product Data Sheet

    Sikament®-2000 AT

    General Information

    Sikament®-2000AT
  • Sikament® RMC

    High range water-reducing and set retarding concrete admixture

     

    Use

    Superplasticizer is used for flowable concrete. At high dosages very good slump keeping for diaphragm walls.

    Characteristics and Advantages

    Sikament® RMC provides the following properties:

    As a superplasticizer:

    • Highly effective without increased w/c ratio or the risk of segregation
    • Lasting control of slump loss
    • No adverse effect on ultimate strength

    As a water reducer:

    • Ultimate strength significantly increased
    • Allow substantial cement reduction compared to plain concrete
    • Especially suitable for hot climate
    • No excessive air entrainment
    • No adverse shrinkage effect
    • Improved surface finish
    • Increased watertightness

    Color

    Dark BrownPackaging

    1000 ltr

    200 ltr

    25 ltr

    5 ltr

    Product Data Sheet

    Sikament® RMC
  • Sikament® V4

    High range water-reducing and set retarding concrete admixture

     

    Use

    Superplasticizer is used for flowable concrete

    Characteristics and Advantages

    Sikament® V4 provides the following properties:

    As a superplasticizer:

    • Highly effective without increased w/c ratio or the risk of segregation
    • Lasting control of slump loss
    • No adverse effect on ultimate strength

    As a water reducer:

    • Ultimate strength significantly increased
    • Allow substantial cement reduction compared to plain concrete
    • Especially suitable for hot climate
    • No excessive air entrainment
    • No adverse shrinkage effect
    • Improved surface finish
    • Increased watertightness

    Color

    Dark BrownPackaging

    1000 ltr

    200 ltr

    25 ltr

    5 ltr

    Product Data Sheet

    Sikament® V4

    General Information

    Sikament® V4
  • Sika® ViscoCrete®-3000

    High Range Water Reducing Admixture

     

    Use

    For manufacture concrete for RMC and precast batching plants.

    Characteristics and Advantages

    • Extremely high water reduction.
    • Producing soft consistency and suitable for pumping.
    • High flowability (considerably reduced placing and compacting work)
    • Workability can be maintained up to 90 minutes (still depends on admixture dosage, cement type, temperature).
    • Improved creep and shrinkage resistance characteristics.
    • Contains neither chlorides nor other corrosion-inducing substances and can therefore be used without any restrictions for reinforced and prestressed concrete structures.

    Color

    Light BrownishPackaging

    200 ltr

    25 ltr

    5 ltr

  • SikaPlast®-257

    Mid Range Water Reducing Admixture

     

    Use

    SikaPlast® 257 is mainly suitable for the manufacture of concrete for RMC plants and site batch concrete SikaPlast® 257 is used for the following types of concrete:
    - High strength Bored piles
    - Bridges and cantilever
    - Slender components with dense reinforcement

    Characteristics and Advantages

    Sika Plast® 257 combines different modes of actions. By adsorption on the surface of the fines and keeping them apart while the hydration is in progress, SikaPlast® 257 effects the following concrete properties:
    - Long Slump keeping and high water reduction
    - High flowability (considerably reduced placing and compacting work).
    - Faster evolution of early strength development
    - Workability can be maintained up to 4-6 hours (still depends on admixture dosage, cement type, temperature)
    - Improved creep and shrinkage resistance characteristics
    SikaPlast® 257contains neither chlorides nor other corrosion-inducing subsances and can therefore be used without any restrictions for reinforced concrete structures.

    Color

    Brownish

    Packaging

    1000 ltr
    200 ltr
    25 ltr
    5 ltr

    Product Data Sheet

    SikaPlast®-257
  • Sika® ViscoCrete®-3000-20 M

    High Range Water Reducing Admixture

     

    Use

    Sika® Viscocrete® 3000-20 M is mainly suitable for the manufacture of concrete for RMC and precast batching plants.
    Sika® Viscocrete® 3000-20 M excels by its extremely high water reduction capacity, providing good flow ability while retaining optimal cohesion of the mix.
    Sika® Viscocrete® 3000-20 M is used for the following types of concrete:

    - High-strength/ High performance cast on site concrete.
    - High strength bored piles
    - Bridges and cantilever
    - Slender components with dense reinforcement.

    Characteristics and Advantages

    Sika® Viscocrete® 3000-20 M combines different modes of actions. By adsorption on the surface of the fine cement grains and keeping them apart while the hydration is in progress, Sika® Viscocrete® 3000-20 M effects the following concrete properties:
     - Extremely high water reduction.
     - Producing very soft consistency and suitable for Long distance pumping
     - High flowability (considerably reduced placing and compacting work).
     - Workability can be maintained up to 120 minutes (still depends on admixture dosage, cement type, temperature).
     - Highly improved waterproofness.
     - Improved creep and shrinkage resistance characteristics.
    Sika® Viscocrete® 3000-20 M contains neither chlorides nor other corrosion-inducing substances and can therefore be used without any restrictions for reinforced and prestressed concrete structures.

    Color

    Brown

    Packaging

    200 ltr
    25 ltr
    5 ltr

  • Sikament® MP-H

    High Range Water-Reducing and Set Retarding Concrete Admixture

     

    Use

    Used as a superplasticizer and set-retarding admixture in structural and mass concrete where long lasting slump and a controlled extension of setting time is required

    Characteristics and Advantages

    Sikament® MP-H provides the following properties:
    As a superplasticizer with set retarding effect:
    - Highly effective without increased w/c ratio
    - Lasting control of slump loss
    - Controlled setting time
    - Avoidance of cold joints
    - No adverse effect on ultimate strength
    As a water reducer:
    - Strength significantly increased
    - Allow substantial cement reduction compared to plain concrete
    - Especially suitable for hot climate
    - No excessive air entrainment
    - No adverse shrinkage effect
    - Improved surface finis

    Color

    Dark Brown

    Packaging

    5 / 25 / 200 litres drum

    Product Data Sheet

    Sikament® MP-H
  • Sikament® R-4 (N)

    High Range Water-Reducing and Set Retarding Concrete Admixture

     

    Use

    Sikament® R4 (N) superplasticizer is used for flowable concrete in:
    - Floor slabs
    - Foundations
    - Slender components with densely packed reinforcement
    - Walls
    - Columns
    - Beams

    Characteristics and Advantages

    Sikament® R4 (N) provides the following properties:
    As a superplasticizer:
    - Highly effective without increased w/c ratio or the risk of segregation
    - Lasting control of slump loss
    - No adverse effect on ultimate strength
    As a water reducer:
    - Early and ultimate strength significantly increased
    - Allow substantial cement reduction compared to plain concrete
    - Especially suitable for hot climate
    - No excessive air entrainment
    - No adverse shrinkage effect
    - Improved surface finish
    - Increased watertightness

    Color

    Dark Brown

    Packaging

    5 / 25 / 200 litres drum

    Product Data Sheet

    Sikament® R4 (N)
  • Sika® ViscoCrete®-2670

    High Range Water Reducing Admixture

     

    Use

    Sika® Viscocrete® 2670 is mainly suitable for the manufacture of concrete for RMC and precast batching plants.
    Providing good flow ability while retaining optimal cohesion of the mix.
    Sika® Viscocrete® 2670 is used for the following types of concrete:
    - High-strength/ High performance cast on site concrete.
    - High strength bored piles
    - Bridges and cantilever
    - Slender components with dense reinforcement.

    Characteristics and Advantages

    Sika® Viscocrete® 2670 combines different modes of actions. By adsorption on the surface of the fine cement grains and keeping them apart while the hydration is in progress, Sika Viscocrete 2670 effects the following concrete properties:
    - High water reduction.
    - Producing very soft consistency and suitable for Long distance pumping
    - High flowability (considerably reduced placing and compacting work)
    - Workability can be maintained up to 120 minutes (still depends on admixture dosage, cement type, temperature).
    Sika® Viscocrete® 2670 contains neither chlorides nor other corrosioninducing substances and can therefore be used without any restrictions for reinforced and prestressed concrete structures.

    Color

    Light brownish

    Packaging

    5 / 25 / 200 litres drum

    Product Data Sheet

    Sika® ViscoCrete®-2670
  • Sika® ViscoCrete® TP Flow

    High Range Water Reducer and Set Retarding concrete admixture

     

    Use

    Sika® ViscoCrete® TP Flow is suitable for the production of site mixed as well as ready-mix following types of concrete:
    - Concrete with highest water reduction
    - High strength/High performance concrete
    - Excellent and retained workability concrete
    - Flowable to Self Compacting Concrete.
    - Shotcrete application wet process

    Characteristics and Advantages

    Sika® ViscoCrete® TP Flow combines different modes of actions resulting in optimum dispersion of the binder and at the same time improves cohesion of concrete.
    Sika® ViscoCrete® TP Flow has the following advantages:
    - Extremely high water reduction, consequently durable concrete providing high density concrete, high strength can be produced
    - Thanks to high water reduction and optimum cement dispersion, it improves shrinkage and creep behavior
    - Provides an excellent workability that can be retained for up to 2 hours.
    - Increases early and final strengths that can allow substantial cement reduction.
    - Improves impermeabilty of concrete by reducing water/cement ratio.
    - Increases cohesion without segregation that facilitates pumping.
    - Can be used at low dosages

    Color

    Brownish

    Packaging

    5 / 25 / 200 litres drum

    Product Data Sheet

    Sika® ViscoCrete® TP Flow
  • SikaPlast®-257 M

    PCE Based Superplasticizing and Set Retarding Concrete Admixture

     

    Use

    SikaPlast®-257M is mainly suitable for the manufacture of concrete for RMC plants and site batch concrete SikaPlast®-257M is used for the following types of concrete:
    - High strength Bored piles
    - Bridges and cantilever
    - Slender components with dense reinforcement

    Characteristics and Advantages

    SikaPlast®-257M combines different modes of actions. By adsorption on the surface of the fines and keeping them apart while the hydration is in progress, SikaPlast®-257M effects the following concrete properties:
    - Long Slump keeping and high water reduction
    - Faster evolution of strength development
    - Workability can be maintained up to 4-8 hours (still depends on admixture dosage, cement type, temperature)
    - Improved creep and shrinkage resistance characteristics
    SikaPlast®-257M contains neither chlorides nor other corrosion-inducing subsances and can therefore

    Color

    Brownish

    Packaging

    5 / 25 / 200/1000 litres

    Product Data Sheet

    SikaPlast®-257 M